elitefiltration.com.au/specs/
Spec sheet
20-Inch Triple-Stage Whole House Water Filter System
A heavy-duty, three-stage point-of-entry (POE) system that filters water for the entire home — reducing sediment, chlorine taste and odour, and scale — at up to 50 litres per minute.
- Flow rate
- Up to 50 L/min
- Filtration
- 3 stages
- Cartridges
- 20 × 4.5 inch
- Warranty
- 5 years
- W × H × D with cover
- 570 × 770 × 215 mm
Overview
Compact and space-saving. At just 215 mm deep, it suits installations where space is limited, while still taking full-size 20 × 4.5 inch cartridges, which hold more filter media than slim cartridges.
Fully enclosed. The frame, bracket and cover are 304 stainless steel, powder coated for Australian conditions. The cover protects the gauges and filter housings from the weather.
Easy to maintain. A pressure gauge on every stage makes it easy to keep an eye on the system, and a cartridge spanner is included for cartridge changes.
Filtration stages
| Stage | Cartridge fitted | Reduces |
|---|---|---|
| Stage 1 | 5 micron pleated sediment | Sediment such as sand, silt and rust particles |
| Stage 2 | 1 micron coconut carbon (CTO) with scale reduction | Chlorine taste and odour, and scale |
| Stage 3 | 1 micron coconut carbon (CTO), 1100–1200 iodine value | Chlorine taste and odour |
For PFAS, chloramine, lead and heavy metal reduction, fit the premium replacement kit.
General specifications
- Filter stages
- 3
- Cartridge size
- 20 × 4.5 inch (approx. 508 × 114 mm)
- Filter housings
- White, with black filter heads
- Flow rate
- Up to 50 L/min
- Installation type
- Point of entry (whole house)
- Inlet and outlet
- 25 mm brass ports with compression seals
- Pressure gauges
- 3 × 60 mm stainless steel, brass gauge ports
- Weight
- 32 kg with filters (dry)
- Colour
- Surfmist — the cover can be re-powder coated in another colour if needed
Dimensions
| Dimension | System | With cover and feet |
|---|---|---|
| Width | 565 mm | 570 mm |
| Height | 765 mm | 770 mm |
| Depth | 215 mm | 215 mm |
| Weight | 32 kg with filters (dry) | |
Construction
| Part | Size | Material | Finish |
|---|---|---|---|
| Bracket | 2 mm | Powder-coated 304 stainless steel | Pressed and rolled |
| Frame | 20 mm SHS | Powder-coated 304 stainless steel | TIG welded |
| Feet | 20 mm O/D × 10 mm high | Rubber | Tapered |
SHS: square hollow section. O/D: outside diameter.
What’s included
- Three-stage 20 × 4.5 inch water filter system, cartridges fitted
- Powder-coated stainless steel integrated bracket and frame
- Powder-coated stainless steel full cover in Surfmist
- Three 60 mm stainless steel pressure gauges
- Cartridge spanner
- Mounting template
Maintenance
Replace all three cartridges every 12 months — or as often as every 6 months with poor water quality or heavy use. Replacing them every 12 months is a condition of the warranty.
- Standard replacement kit: the same three cartridges supplied with the system.
- Premium replacement kit: adds PFAS, chloramine, lead and heavy metal reduction.
Installation
Installation isn’t included. The system connects to the property’s main water supply, so it must be installed by a licensed plumber in line with Australian plumbing regulations. A mounting template is supplied.
5-year warranty
- Year 1
- Parts and labour
- Years 2–5
- Parts
The warranty doesn’t cover consumables such as filter cartridges, and the cartridges must be replaced every 12 months. Full terms: elitefiltration.com.au/warranty.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Contact us
- 0489 270 364
- elitefiltration@outlook.com
- elitefiltration.com.au
- Central Coast, NSW — warehouse visits by appointment only
